October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Circuit Opening Relay: Es300
- Turn ignition off. Circuit opening relay is located under right side of instrument panel, above glove box. Remove relay from vehicle. Using an ohmmeter, check for continuity between relay terminals ST and E1. See Fig 1. Check for continuity between terminals IG and FC. Ensure continuity does not exist between terminals "B" and FP. If continuity is not as specified, replace relay.
- Apply battery voltage between terminals ST and E1. Using an ohmmeter, ensure continuity is present between terminals "B" and FP.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002