TRAC Solenoid Relay
- Remove TRAC solenoid relay from relay box No. 6. Measure voltage (10-14 volts present) between terminal No. 1 of TRAC solenoid relay and body ground. Repair or replace harness or connector, if 10-14 volts is not present.
- Check continuity between terminal No. 3 of relay box No. 6 and terminals SAC, SMC, SRC of ABS/TRAC ECU. Also, check continuity of TRAC actuator solenoid. If readings are not 2 ohms, repair or replace harness or TRAC actuator. See Figure.