LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1994 >> SC 400 >> Repair and Diagnosis >> Brakes >> Traction Control >> Traction Control System >> Bleeding Brake System >> TRAC System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TRAC System

CAUTION: Brake fluid will damage painted surfaces. If brake fluid is spilled on painted surface, wipe it off immediately and clean with alcohol. Use only DOT 3 brake fluid from a sealed container. DO NOT mix brake fluid with any other type.
  1. Bleed TRAC system by connecting a vinyl hose to accumulator bleed plug. Loosen accumulator bleed plug. Start engine. Operate TRAC pump motor until all air bubbles have been bled. Tighten bleed plug to 74 INCH lbs. (8.3 N.m). With engine running, add brake fluid. Turn engine off.
  2. Connect vinyl tube to TRAC actuator bleed plug. Loosen bleed plug. Start engine. Operate TRAC pump motor until all air bubbles have been bled. Tighten bleed plug to 74 INCH lbs. (8.3 N.m). With engine running, add brake fluid. Turn engine off. Clear any code(s) stored. See CLEARING CODES under DIAGNOSIS & TESTING.
scientia non olet · About LEMON Manuals