IAC System Operation
- Ensure engine is at normal operating temperature. Ensure idle speed is 650-750 RPM. See CONNECTING TACHOMETER under INTRODUCTION. Shift transmission into Neutral. Turn A/C off. Connect Jumper Wire (09843-18020) between terminals TE1 and E1 of DLC No. 1. See Figure.
- If engine speed increases to about 1000 RPM for about 5 seconds, then decreases to idle speed of 650-750 RPM, IAC system is okay. If engine speed is not as specified, disconnect jumper wire from DLC No. 1, then go to next procedure.