LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1995 >> ES 300 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> A/C Cut Control System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Cut Control System

  1. Remove glove box. Turn ignition on. Leave harness connectors attached to ECM. See COMPONENT LOCATIONS  under INTRODUCTION. Measure voltage between chassis ground and terminal No. 5 (Light Green/Red wire) of ECM connector E10. To identify ECM connectors and terminals, see Figure. Wit h A/C on, battery voltage should be present. With A/C off, 0-2 volts should be present.
  2. If voltage is as specified, replace A/C control assembly. If voltage is not as specified, check for open or short in circuit between ECM and A/C control assembly. If circuit is okay, replace A/C control assembly.
scientia non olet · About LEMON Manuals