Pick-Up Coil

Measure resistance between specified terminals of distributor connector. See DISTRIBUTOR PICK-UP COIL RESISTANCE table. See Fig 1. If resistance is not as specified, replace distributor housing assembly.

DISTRIBUTOR PICK-UP COIL RESISTANCE

Application

Ohms

Cold ⁽¹⁾

Between Terminals G1 & "G-"

125-200

Between Terminals G2 & "G-"

125-200

Between Terminals NE & "G-"

155-250

Hot ⁽²⁾

Between Terminals G1 & "G-"

160-235

Between Terminals G2 & "G-"

160-235

Between Terminals NE & "G-"

190-290

⁽¹⁾	Sensor temperature of 14-122°F (-10-50°C).

⁽²⁾	Sensor temperature of 123-212°F (51-100°C).

Fig 1: Identifying Distributor Connector Terminals