LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1995 >> SC 300 Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System/Component Tests >> Introduction >> Using Check Harness
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Check Harness

  1. When checking voltage and resistance at ECM connector terminals, use Check Harness (09990-01000, also called Check Harness "A") to prevent terminal damage. To connect check harness, disconnect ECM connectors. See COMPONENT LOCATIONS . Connect the check harness between ECM and harness.
  2. Connectors and terminals on check harness match those of ECM. Wire colors that are specified in procedures apply to ECM connectors, but may not apply to check harness connectors. To identify connectors and terminals, see Fig 1.
Fig 1: Identifying ECM Terminals
G93B78296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals