LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1995 >> SC 400 >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position (TP) Sensor >> Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position (TP) Sensor: Adjustment

  1. Disconnect TP sensor connector. Loosen TP sensor mounting screws. Insert specified feeler gauge between throttle stop screw and throttle lever. See TP SENSOR ADJUSTMENT  table.
  2. Connect ohmmeter between terminals IDL (or IDL1) and E2 of TP sensor connector. See Figure. Rotate TP sensor counterclockwise until there is no continuity, then rotate it clockwise until there is continuity. Tighten TP sensor mounting screws. Inspect TP sensor again.
TP SENSOR ADJUSTMENT

Application Feeler Gauge Thickness
SC400 .016" (.41 mm)
scientia non olet · About LEMON Manuals