Throttle Position (TP) Sensor

NOTE: Vehicles with Traction Control System (TRAC) are equipped with a main TP sensor and a sub-TP sensor. The following table applies to main TP sensor. For sub-TP sensor table, see SUB-THROTTLE POSITION (SUB-TP) SENSOR.

TP SENSOR RESISTANCE

Application & Throttle Plate Position ⁽¹⁾

TP Sensor ⁽²⁾ Terminals

Ohm Reading

Throttle Fully Closed

VTA & E2

200-5700

Throttle Fully Open

VTA & E2

2000-10,200

All Positions

VC & E2

2500-5900

⁽¹⁾	For terminal identification, see THROTTLE POSITION (TP) SENSOR in ON-VEHICLE ADJUSTMENTS article.

⁽²⁾	Disconnect vacuum hose from throttle opener. Apply vacuum to throttle opener to allow throttle to fully seat.