Sub-Throttle Position (Sub-TP) Sensor

NOTE: Vehicles with Traction Control System (TRAC) are equipped with a main TP sensor and a sub-TP sensor. The following table applies to sub-TP sensor. For main TP sensor table, see THROTTLE POSITION (TP) SENSOR.

SUB-TP SENSOR RESISTANCE

Throttle Plate Position

Sub-TP Sensor Terminals

Ohm Reading

Throttle Fully Closed

VTA1/2 & E2

340-6300

.012" (.35 mm) ⁽¹⁾

IDL1/2 & E2

500 Or Less

.020" (.50 mm) ⁽¹⁾

IDL1/2 & E2

Infinite (Open)

Throttle Fully Open

VTA1/2 & E2

2400-11,200

All Positions

VC & E2

3100-7200

⁽¹⁾	Remove sub-throttle actuator from throttle body. Insert feeler gauge between end of sub-throttle valve gear and sub-throttle valve stop screw.