LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1997 >> SC 300 Automatic >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System/Component Tests >> Introduction >> Using Check Harness
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Check Harness

  1. When checking voltage and resistance at ECM connector terminals, use Check Harness (SST 09990-01000, also called Check Harness "A") to prevent damaging terminals. See Fig 1.
  2. To connect check harness, disconnect ECM connectors. ECM is located underneath top of passenger-side carpet (behind glove box) and is mounted to floor panel. Connect the check harness between ECM and harness connectors.
  3. Connectors and terminals on check harness match those of ECM. Wire colors that are specified in procedures apply to ECM connectors, but may not apply to check harness connectors. To identify connectors and terminals, see appropriate illustration under CONNECTOR IDENTIFICATION .
Fig 1: Identifying Check Harness "A"
G96E09639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals