Engine Controls - Basic Diagnostic Procedures
- Introduction
- Preliminary Inspection & Adjustments
- Fuel System
- Notes
- Fuel Pump Operation
- Notes
- Checking Fuel Pump Operation Using Scan Tool (ES300 & RX300)
- Checking Fuel Pump Operation Using Scan Tool (GS300, GS400, SC300 & SC400)
- Checking Fuel Pump Operation Using Scan Tool (LS400)
- Checking Fuel Pump Operation Using Scan Tool (LX470)
- Checking Fuel Pump Operation By Applying Battery Voltage To Fuel Pump
- Fuel Pressure Release
- Fuel Pressure
- Ignition Checks
- Idle Speed & Ignition Timing
- Summary