No-Load Test
CAUTION:
DO NOT operate starter for more than 3-5 seconds.
Connect battery and ammeter to starter. See Figure or Figure . Perform STEP 4. Starter armature should rotate smoothly and steadily with pinion gear moving out. Amperage draw should be within specification. See NO-LOAD TEST SPECIFICATIONS table.
NO-LOAD TEST SPECIFICATIONS
| Application | Maximum Amps | Volts |
|---|---|---|
| ES300, GS300, RX300 & SC300 | 90 | 11.5 |
| GS400, LS400 & SC400 | 100 | 11.5 |