LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2000 >> RX 300 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Fuel System >> Fuel Delivery >> Fuel Pump Operation (Using Lexus Scan Tool)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Operation (Using Lexus Scan Tool)

  1. Connect Lexus scan tool to Data Link Connector (DLC) No. 3. See Figure or Figure. Turn ignition on. Turn scan tool on. DO NOT start engine.
  2. Select ACTIVE TEST mode on scan tool. Using Lexus scan tool manufacturer's instructions, activate electric fuel pump. Fuel pump is operating if fuel pump operating sound can be heard or pulsations can be felt in fuel line near fuel rail.
  3. If fuel pump does not operate, check for faulty fusible link/fuses. See appropriate wiring diagram in WIRING DIAGRAMS article. Check for faulty circuit opening relay or EFI main relay in fuse/relay box at left front of engine compartment. Check for faulty fuel pump, ECM or poor wiring connections.
scientia non olet · About LEMON Manuals