Electronically Controlled Transmission (ECT) Pattern Select Switch Circuit
NOTE:
If LEXUS scan tool is available, start test from step 1. If this scan tool is not available, start test from step 2.
- Using scan tool, check pattern select switch using DATA LIST. If pattern select switch is faulty, go to next step. If pattern select switch is okay, go to next test listed in appropriate SYMPTOM DIAGNOSIS table under TROUBLE SHOOTING .
- Check pattern select switch. See PATTERN SELECT SWITCH under COMPONENT TESTS. Replace pattern select switch as necessary. Retest system operation. If switch is okay, go to next step.
- Check circuits for faults between pattern select switch and body control ECU. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, go to next test listed in BODY NO. 3 CONTROL SYSTEM table under TROUBLE SHOOTING .