LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> ES 300 >> Repair and Diagnosis >> Engine Performance >> Engine Controls - On-Vehicle Adjustments >> Throttle Position (TP) Sensor >> RX300 >> Testing TP Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Testing TP Sensor

  1. Disconnect electrical connector from TP sensor. Note electrical terminals on TP sensor. See Fig 1. Apply vacuum to throttle opener.
  2. Using ohmmeter, check resistance between specified terminals in relation to throttle position. See TP SENSOR RESISTANCE (RX300)  table. Replace TP sensor as necessary if resistance is not within specification.
TP SENSOR RESISTANCE (RX300) (1)

Throttle Position Terminals Ohms
Fully Closed VTA & E2 200-6300
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
Fig 1: Identifying Throttle Position (TP) Sensor Terminals
G99C50429Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals