Jam Protection Function Check
WARNING:
Never use any part of your body when checking the jam protection function.
NOTE:
If performing the resetting of the limit switch, check after repeating up and down of the glass with automatic operation.
NOTE:
If removing the glass, glass guide, regulator and etc. be sure to check the jam protection function. If the jam protection is not functioning properly, adjust the power window motor reset switch and pulse switch.
- Confirm the AUTO UP operation. Confirm that the window will be fully closed with the AUTO UP operation.
- Check the operation of the jam protection function.
- Move up the window with the AUTO UP operation and check that the window will go down when it touches the handle of the hammer.
- Confirm that the window will then stop going down about 200 mm.