Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Brush Length | |||||
| Standard | 0.379-0.453 in. (9.5-11.5 mm) | ||||
| Limit (Minimum) | More Than .059 in. (1.5 mm) | ||||
| Rotor | |||||
| Resistance (1) | 2.7-3.1 Ohms | ||||
| Slip Ring Diameter | |||||
| Standard | 0.559-0.567 in. (14.2-14.4 mm) | ||||
| Minimum | 0.504 in. (12.8 mm) | ||||
| Generator Regulated Output | |||||
| Amperage | |||||
| Without Load | 10 Or Less Amps | ||||
| With Load | 30 Or More Amps | ||||
| Voltage (1) | 13.2-14.8 Volts | ||||
|
|||||