LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> GS 300 >> Repair and Diagnosis >> Electrical >> Gauges >> Compass >> Pre-Check >> 7. Zone Setting Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

7. Zone Setting Mode

  1. Keep pressing the mode select switch for 3 sec. after selection of the compass display mode will activate the zone setting mode, showing a number (1-15) on the compass display.
  2. Pressing the mode select switch for 6 sec. from the normal mode will also activate the zone setting mode.

    HINT:

    In the initial status, "8" is displayed.

  3. The displayed number increases +1 every time the mode select switch is pressed. Referring to Figure , check the number for the area where the vehicle will be used and set the zone number.
  4. Leave it untouched for several seconds after setting and check that the compass display shows an azimuthal direction (N, NE, E, SE, S, SW, W, or NW) or "C".
scientia non olet · About LEMON Manuals