Power Window Switch
Inspect the power window switch continuity. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 6. See CONNECTOR IDENTIFICATION . See INSPECTING POWER WINDOW SWITCH CONTINUITY table. If continuity is not as specified, replace the switch. See Figure.
INSPECTING POWER WINDOW SWITCH CONTINUITY
| Switch Position | Tester Connection | Specified Condition |
|---|---|---|
| UP | 2 - 3, 4 - 5 | Continuity |
| OFF | ..... | No Continuity |
| DOWN | 2 - 4, 3 - 5 | Continuity |