Erasure Of Transponder Key Code (Except PRIUS): Notes

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: There are 2 different methods to erase the transponder key code: using brake pedal and accelerator pedal, or using Toyota hand-held tester. All other master and sub-key codes are deleted leaving the master key code which was used when performing the operation. When using the ignition key which was used before deleting, it is necessary to register the code again.

NOTE: When any operation time described in following procedures is over, registration mode completes. When next procedure is performed while timer is working, the timer completes counting time and then the next timer starts.