Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Brush Length | |||||
| Standard | 0.379-0.453 Inch (9.5-11.5 mm) | ||||
| Limit (Minimum) | More Than .059 Inch (1.5 mm) | ||||
| Rotor | |||||
| Resistance (1) | 2.2-2.4 Ohms | ||||
| Slip Ring Diameter | |||||
| Standard | 0.559-0.567 Inch (14.2-14.4 mm) | ||||
| Minimum | 0.504 Inch (12.8 mm) | ||||
| Generator Regulated Output | |||||
| Amperage | |||||
| Without Load | 10 Or Less Amps | ||||
| With Load | 30 Or More Amps | ||||
| Voltage (1) | 13.2-14.8 Volts | ||||
|
|||||