Fuel Cut Rpm: Inspection

All the engine to warm up to normal operating temperature.

1. Connect the hand-held tester or OBD II scan tool to the DLC3.
2. Please refer to the hand-held tester or OBD II scan tool operator's manual for further details.
   Fig 1: Connecting Hand-Held Tester To DLC3

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Inspecting Fuel Cut-Off Operation

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Increase the engine speed to at least 3,000 rpm.
2. Check for injector operating noise.
3. Check that when the throttle lever is released, injector operation noise stops momentarily and then resumes.

HINT:

Measure with the A/C OFF.

1. Fuel return rpm: 1,000 rpm