Torque Specification
TIGHTENING TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Fuel line: Union bolt Flare nut for use with SST for use without SST |
29 30 38 |
300 310 387 |
22 22 28 |
| Fuel tank vent tube set plate x Fuel tank | 3.5 | 36 | 31 in.lbf |
| Fuel inlet hose x Body | 9.0 | 90 | 80 in.lbf |
| Delivery pipe x Intake manifold | 21 | 210 | 15 |
| Fuel pressure pulsation damper x Fuel pipe support | 32.5 | 325 | 24 |
| Fuel inlet pipe x Intake manifold | 9.0 | 90 | 80 in.lbf |
| No. 2 vacuum pipe x Intake manifold | 21 | 210 | 15 |
| Fuel sender gauge x Fuel tank | 1.5 | 15 | 13 in.lbf |
| Fuel tank band x Body | 39 | 400 | 29 |
| MAF meter x Air cleaner | 10.7 | 109 | 8 |
| Throttle body bracket x Throttle body | 21 | 210 | 15 |
| Throttle body bracket x Cylinder head | 21 | 210 | 15 |
| Throttle position sensor x Throttle body | 1.7 | 17.5 | 15 in.lbf |
| Throttle control motor x Throttle body | 3.7 | 37.5 | 33 in.lbf |
| Throttle control motor cover x Throttle body | 1.7 | 17.5 | 15 in.lbf |
| Accelerator pedal position sensor x Throttle body | 3.7 | 37.5 | 33 in.lbf |
| Camshaft timing oil control valve x No. 3 camshaft bearing cap | 8.0 | 80 | 71 in.lbf |
| No. 3 timing belt cover x Cylinder head cover | 8.0 | 80 | 71 in.lbf |
| Intake air connector x Air intake chamber | 28 | 280 | 21 |
| Air intake chamber x Intake manifold | 28 | 280 | 21 |
| Vacuum control valve set x Intake manifold | 21 | 210 | 15 |
| ECT sensor x Cylinder head | 19.6 | 200 | 14 |
| Knock sensor x Cylinder block | 44 | 450 | 33 |
| PS pump rear stay x Manifold stay | 39.2 | 400 | 29 |
| PS pump rear stay x PS pump bracket | 39.2 | 400 | 29 |
| Heated oxygen sensor x Exhaust manifold | 45 | 450 | 33 |
| Heated oxygen sensor x Front exhaust pipe | 45 | 450 | 33 |