Camshaft Timing Oil Control Valve ASSY: Replacement
- REMOVE V-BANK COVER
- Remove the 2 nuts and V-bank cover.
- REMOVE AIR CLEANER INLET NO. 1
- REMOVE INTAKE AIR CONNECTOR PIPE
- Disconnect the air hose and ventilation hose.
- Remove the bolt.
- Loosen the 2 hose clamps and remove the intake air connector pipe.
- REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSY RH
- Disconnect the oil control valve connector.
- Remove the bolts and oil control valve.
- INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSY RH
- Install the oil control valve with the bolt.
Torque: 7.5 N.m (76.5 kgf.cm, 66 in.lbf)
- Connect the oil control valve connector.
- Install the oil control valve with the bolt.
- INSTALL INTAKE AIR CONNECTOR PIPE
- Install the intake air connector pipe with the bolt and 2 hose clamps.
Torque:
4.0 N.m (41 kgf.cm, 35 in.lbf) for hose clamp
5.0 N.m (51 kgf.cm, 44 in.lbf) for bolt
- Install the intake air connector pipe with the bolt and 2 hose clamps.
- INSTALL AIR CLEANER INLET NO. 1
- INSTALL V-BANK COVER
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)