Resistance Check (Short Circuit Check)

WARNING: This page is about a different car, the 2004 Lexus GS 430 and 2004 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the connectors on both ends.
Measure the resistance between the applicable terminals of the connectors and body ground. Be sure to carry out this check on the connectors on both ends.
Resistance: 1 MΩ. or higher

Fig 1: Measuring Resistance Between Applicable Terminals Of Connectors And Body Ground
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Measure the resistance while lightly shaking the wire harness vertically and horizontally.