DTC Check/Clear

CHECK DTC
1. Check the DTCs.
  1. Connect the hand-held tester to the DLC3.
    
    Fig 1: Connecting Hand-Held Tester To DLC3
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Turn the ignition switch to the ON position.
  3. Check the DTCs by following the prompts on the tester screen.
  HINT:
  
  Refer to the hand-held tester operator's manual for further details.
2. Clear the DTCs.
  1. Connect the hand-held tester to the DLC3.
  2. Turn the ignition switch to the ON position.
  3. Check the DTCs by following the prompts on the tester screen.
HINT:

Refer to the hand-held tester operator's manual for further details.