Fail-Safe Table
- INSPECT POWER WINDOW FAIL-SAFE FUNCTION
- When an abnormality is detected in the limit switch and pulse sensor for operating the jam protection function (DTC: B1231, B1232, B1233, B1234), the following power window operations will be prohibited for fail-safe.
Standard:
POWER WINDOW FAIL-SAFE FUNCTIONPower window operation Ignition switch ON Ignition switch OFF, key-off operation function ON (within 43 sec.) Ignition switch OFF, key-off operation function OFF (after 43 sec.) Manual UP Operative Operation prohibited - Manual DOWN Operative Operation prohibited - AUTO UP Operation prohibited Operation prohibited - AUTO DOWN Operation prohibited Operation prohibited - UP interlocked with key operation - Operation prohibited Operation prohibited DOWN interlocked with key operation - Operation prohibited Operation prohibited UP interlocked with wireless operation - Operation prohibited Operation prohibited DOWN interlocked with wireless operation - Operation prohibited Operation prohibited HINT:
When the limit switch is functioning normally, prohibition (fail-safe function) will be cancelled by fully opening or fully closing the door glass by manual operation. Then AUTO operation will be possible.
- When an abnormality is detected in the limit switch and pulse sensor for operating the jam protection function (DTC: B1231, B1232, B1233, B1234), the following power window operations will be prohibited for fail-safe.