Front Seat Inner Belt Assembly: Inspection

1. Measure the resistance between terminals of the switch when the switch is operated.

   HINT:

   • This is the inspection procedure of the inner belt switch for the tension reducer.
   • The circuit of the seat belt warning or airbag system cannot be inspected by this procedure.

Fig 1: Identifying Front Seat Inner Belt Assembly RH Connector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Resistance 

Fig 2: Identifying Front Seat Inner Belt Assembly LH Connector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Measure the resistance between terminals of the switch when the switch is operated.

   HINT:

   • This is the inspection procedure of the inner belt switch for the tension reducer.
   • The circuit of the seat belt warning or airbag system cannot be inspected by this procedure.

   Resistance 

   TESTER CONNECTION SPECIFIED CONDITION
   
   

   Tester Connection	Condition	Specified Condition
   4 - 5	Seat belt is fastened	Below 1 ohms
   4 - 5	Seat belt is unfastened 10	k ohms or higher