LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> LS 430 >> Repair and Diagnosis >> General Information >> Towing >> Introduction >> Repair Instruction >> Initialization
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Instruction: Initialization

NOTE: When disconnecting the negative (-) battery terminal, initialize the following system(s) after the terminal is reconnected.
SYSTEM NAME REFERENCE CHART

System Name See Step No.
Front Power Seat Control System 1
  1. INITIALIZE FRONT POWER SEAT CONTROL SYSTEM 
    1. The power seat ECU must be initialized under any of the following conditions.
      • The battery is disconnected.
      • The D/C CUT fuse is replaced.
      • The power seat switch (power seat ECU) is replaced.
      • The power seat assy is removed from the vehicle.
    2. Initialize the power seat ECU as follows.
    1. Using the seat switches, fully slide the seat forward, fully recline the seatback forward, and fully raise the seat cushion and headrest.
    2. Using the seat switches, fully slide the seat rearward, fully recline the seatback rearward, and fully lower the seat cushion and headrest.
scientia non olet · About LEMON Manuals