Engine Control System (3MZ-FE): ECM: Removal

REMOVE FRONT DOOR SCUFF PLATE RH (See REMOVAL )
REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2 (See REMOVAL )
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See REMOVAL )
REMOVE ECM
1. Remove the 2 wire harness clamps.
2. Disconnect the 5 ECM connectors.
3. Remove the 2 nuts, and then remove the ECM.
  
  Fig 1: Removing ECM Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 screws, and then remove the wire harness clamp bracket.
Fig 2: Removing Wire Harness Clamp Bracket Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET
1. Remove the 2 screws, and then remove the ECM bracket.
Fig 3: Removing ECM Bracket
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET NO. 2
1. Remove the 2 screws, and then remove the ECM bracket.
Fig 4: Removing ECM Bracket No. 2
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002