LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> DTC B2313 Glass Position Initialization Incomplete >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

NOTE: When using the intelligent tester to troubleshoot the LIN communication line: Connect the intelligent tester to the vehicle, and turn the courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
  1. CHECK DTC OUTPUT 
    1. Turn the engine switch off.
    2. Wait for at least 10 seconds, and then turn the engine switch on (IG).
    3. Check whether the DTC output recurs.

      Result 

      RESULT CHART

      Display (DTC Output) Proceed to
      B2313 A
      No output B

    B: END 

    A: Go to Next Step 

  2. INITIALIZE SYSTEM (POWER WINDOW CONTROL SYSTEM) 
    1. Turn the engine switch on (IG) and initialize the power window regulator motor (on the driver side) (See INITIALIZATION  ).
    2. Turn the engine switch off.
    3. Wait for at least 10 seconds, and then turn the engine switch on (IG).
    4. Check whether the DTC output recurs.

      Result 

      RESULT CHART

      Display (DTC Output) Proceed to
      No output A
      B2313 B

    B: REPLACE DRIVER SIDE POWER WINDOW REGULATOR MOTOR ASSEMBLY 

    A: END 

scientia non olet · About LEMON Manuals