Data List / Active Test
- DATA LIST
HINT:
With the intelligent tester connected to the DLC3 and the engine switch on (IG), the ABS, TRAC and VSC Data List can be displayed. Follow the prompts on the tester screen to access the Data List.
DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note ABS MTR RELAY ABS motor relay / ON or OFF ON: Motor relay ON
OFF: Motor relay OFF- SOL RELAY Solenoid relay / ON or OFF ON: Solenoid relay ON
OFF: Solenoid relay OFF- FAIL MTR RELAY Fail safe motor relay / ON or OFF ON: Motor relay ON
OFF: Motor relay OFF- IDLE SW Main idle switch / ON or OFF ON: Accelerator pedal released
OFF: Accelerator pedal depressed- STOP LAMP SW Stop light switch / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released- PARKING BRAKE SW Parking brake switch / ON or OFF ON: Parking brake applied
OFF: Parking brake released- ENG REVOLUTIONS Engine revolutions / min.: 0 r/min, max.: 65,535 r/min - - GEAR POSITION Gear position information / P/N, R, 1+st-6th, FAIL, NOT R - - LEVER POSITION Shift lever position information / P/N, R, D/M, 1st-6th/B, FAIL - - SHIFT INFO Shift information / ON or OFF ON: During gear change - FR WHEEL SPD FR wheel speed sensor reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Similar speed as indicated on speedometer FL WHEEL SPD FL wheel speed sensor reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Similar speed as indicated on speedometer RR WHEEL SPD RR wheel speed sensor reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Similar speed as indicated on speedometer RL WHEEL SPD RL wheel speed sensor reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Similar speed as indicated on speedometer DECELERAT SEN Acceleration sensor 1 reading / min.: -1.889 G, max.: 1.875 G Approximately 0+-0.13 G while stationary Reading changes when vehicle is bounced DECELERAT SEN 2 Acceleration sensor 2 reading / min.: -1.889 G, max.: 1.875 G Approximately 0+-0.13 G while stationary Reading changes when vehicle is bounced SFRR ABS solenoid (SFRR) / ON or OFF ON: Operates - SFRH ABS solenoid (SFRH) / ON or OFF ON: Operates - SFLR ABS solenoid (SFLR) / ON or OFF ON: Operates - SFLH ABS solenoid (SFLH) / ON or OFF ON: Operates - SRRR ABS solenoid (SRRR) / ON or OFF ON: Operates - SRRH ABS solenoid (SRRH) / ON or OFF ON: Operates - SRLR ABS solenoid (SRLR) / ON or OFF ON: Operates - SRLH ABS solenoid (SRLH) / ON or OFF ON: Operates - SM1 Master cut solenoid (SM1) / ON or OFF ON: Operates - SM2 Master cut solenoid (SM2) / ON or OFF ON: Operates - VEHICLE SPD Maximum wheel speed sensor reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual vehicle speed Speed indicated on speedometer YAW RATE SENS 1 Yaw rate sensor 1 / min.: -128 deg/s, max.: 127 deg/s Min.: -128 deg/s
Max.: 127 deg/s- ZERO YAW RATE Memorized zero value / min.: -128 deg/s, max.: 127 deg/s Min.:-128 deg/s
Max.: 127 deg/s- STEERING SEN Steering angle sensor / min.: -3,276.8 deg, max.: 3,276.7 deg Left turn: Increase
Right turn: Decrease- MAS CYL PRESS 1 Master cylinder pressure sensor 1 reading / min.: 0 V, max.: 5 V When brake pedal is released: 0.3 to 0.5 V Reading increases when brake pedal is depressed ACCELERATOR % The difference of a present accelerator / min.: 0%, max.: 128% - - ENGINE TORQUE Real engine torque / min.: -1,024 N*m, max.: 1,023 N*m - - FR SPD OPN FR speed sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- FL SPD OPN FL speed sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- RR SPD OPN RR speed sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- RL SPD OPN RL speed sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- YAW RATE OPN Yaw rate sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- DECELERAT OPN Acceleration sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- STEERING OPN Steering angle sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- M/C OPN Master cylinder pressure sensor open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- EFI COM OPN EFI communication open detection / ERROR or NORMAL ERROR: Momentary interruption
NORMAL: Normal- #DTC Number of DTC / min.: 0, max.: 255 - - ABS WARN LAMP ABS warning light / ON or OFF ON: Warning light ON
OFF: Warning light OFF- BRAKE WARN LAMP BRAKE warning light / ON or OFF ON: Warning light ON
OFF: Warning light OFF- SLIP INDI LAMP SLIP indicator light / ON or OFF ON: Indicator light ON
OFF: Indicator light OFF- BUZZER Skid control buzzer / ON or OFF ON: Buzzer ON
OFF: Buzzer OFF- VSC WARN LAMP VSC warning (multi information display) / ON or OFF ON: Display ON
OFF: Display OFF- ZERO M/C SEN Memorized zero value / min.: -12.5 MPa, max.: 12.4 MPa Min.:-12.5 MPa
Max.: 12.4 MPa- FR WHEEL ACCEL FR wheel acceleration / min.: -200.84 m/s2 , max.: 199.27 m/s2 Min.: -200.84 m/s2
Max.: 199.27 m/s2- FL WHEEL ACCEL FL wheel acceleration / min.: -200.84 m/s2 , max.: 199.27 m/s2 Min.: -200.84 m/s2
Max.: 199.27 m/s2- RR WHEEL ACCEL RR wheel acceleration / min.: -200.84 m/s2 , max.: 199.27 m/s2 Min.: -200.84 m/s2
Max.: 199.27 m/s2- RL WHEEL ACCEL RL wheel acceleration / min.: -200.84 m/s2 , max.: 199.27 m/s2 Min.: -200.84 m/s2
Max.: 199.27 m/s2- ZERO DECELERAT Memorized zero value / min.: -25.11 m/s2 , max.: 24.91 m/s2 Min.:-25.11 m/s2
Max.: 24.91 m/s2- ZERO DECELERAT 2 Memorized zero value / min.: -25.11 m/s2 , max.: 24.91 m/s2 Min.:-25.11 m/s2
Max.: 24.91 m/s2- ZERO STEERING Memorized zero value / min.: -3,276.8 deg, max.: 3,276.7 deg Min.: -3,276.8 deg
Max.: 3,276.7 deg- LATERAL G Lateral G / min.: -25.11 m/s2 , max.: 24.91 m/s2 Min.: -25.11 m/s2
Max.: 24.91 m/s2- FORWARD&REA G Forward and rearward G / min.: -25.11 m/s2 , max.: 24.91 m/s2 Min.:-25.11 m/s2
Max.: 24.91 m/s2- YAW RATE VALUE Yaw rate value / min.: -128 deg/s, max.: 127 deg/s Min.: -128 deg/s
Max.: 127 deg/s- STEERING ANGLE Steering angle value / min.: -3,276.8 deg, max.: 3,276.7 deg Min.: -3,276.8 deg
Max.: 3,276.7 deg- TRAC STATUS TRAC control status / ON or OFF ON: During the control - TRAC ENG STATUS TRAC engine control status / ON or OFF ON: During the control - TRAC BRK STATUS TRAC brake control status / ON or OFF ON: During the control - FR VSC STATUS FR wheel VSC control status / ON or OFF ON: During the control - FL VSC STATUS FL wheel VSC control status / ON or OFF ON: During the control - RR VSC STATUS RR wheel VSC control status / ON or OFF ON: During the control - RL VSC STATUS RL wheel VSC control status / ON or OFF ON: During the control - FR ABS STATUS FR wheel ABS control status / ON or OFF ON: During the control - FL ABS STATUS FL wheel ABS control status / ON or OFF ON: During the control - RR ABS STATUS RR wheel ABS control status / ON or OFF ON: During the control - RL ABS STATUS RL wheel ABS control status / ON or OFF ON: During the control - RR EBD STATUS RR wheel EBD control status / ON or OFF ON: During the control - RL EBD STATUS RL wheel EBD control status / ON or OFF ON: During the control - BA STATUS BA control status / ON or OFF ON: During the control - PBA STATUS PBA control status / ON or OFF ON: During the control - INSPECTION MODE Inspection mode / OTHER or INSPECT - - #IG ON2 Number of engine switch on (IG) after entering the inspection mode / min.: 0, max.: 255 - - - ACTIVE TEST
HINT:
Performing the Active Test using the intelligent tester allows the relay, actuator, and other items to operate without removing any parts. Performing the Active Test as the first step in troubleshooting is one of the methods to save labor time.
It is possible to display the Data List during the Active Test.
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- On the tester display, select the Active Test.
HINT:
The engine switch must be turned on (IG) to proceed to the Active Test using the intelligent tester.
ACTIVE TEST LISTTester Display Test Part Control Range Diagnostic Note SFRR ABS solenoid (SFRR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SFRH ABS solenoid (SFRH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SFLR ABS solenoid (SFLR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SFLH ABS solenoid (SFLH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SRRR ABS solenoid (SRRR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SRRH ABS solenoid (SRRH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SRLR ABS solenoid (SRLR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SRLH ABS solenoid (SRLH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SMF Master cut solenoid (SM1) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SMR Master cut solenoid (SM2) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard SOL RELAY ABS solenoid relay Relay ON / OFF - MOTOR RELAY ABS motor relay Relay ON / OFF Operating sound of relay (clicking sound) and motor can be heard ABS WARN LAMP ABS warning light Warning light ON / OFF Observe combination meter VSC WARN LAMP VSC warning (multi information display) Warning (display) ON / OFF Observe combination meter SLIP INDI LAMP SLIP indicator light Indicator light ON / OFF Observe combination meter BRAKE WARN LAMP BRAKE warning light Warning light ON / OFF Observe combination meter BUZZER Skid control buzzer Buzzer ON / OFF Buzzer can be heard STP LAMP RELAY (1) Stop light control relay Relay ON/OFF Stop light comes on (Does not come on for 5 seconds or more) (1) with dynamic radar cruise control