Ignition Coil: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER RH (See REMOVAL )
REMOVE FRONT SUSPENSION UPPER CENTER BRACE (See REMOVAL )
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
DRAIN ENGINE COOLANT (See COOLANT )
REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See ON-VEHICLE INSPECTION )
REMOVE INTAKE AIR SURGE TANK ASSEMBLY (See REMOVAL )
REMOVE NO. 1 SURGE TANK STAY
1. Remove the bolt and disconnect the harness clamp.
  
  Fig 1: Locating Bolt And Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and No. 1 surge tank stay.
  
  Fig 2: Locating Bolt And No. 1 Surge Tank Stay
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE IGNITION COIL ASSEMBLY
1. Disconnect the 6 ignition coil connectors.
2. Remove the 6 bolts and 6 ignition coils.
  
  Fig 3: Locating Ignition Coils And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002