LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Front Seat Inner Belt Assembly >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seat Inner Belt Assembly: Inspection

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH 
    1. Measure the resistance between terminals of the switch when the switch is operated.

      HINT:

      This is the inspection procedure of the inner belt switch for the tension reducer.

      Fig 1: Identifying Front Seat Inner Belt Assembly RH Connector Terminals
      G05251971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION REFERENCE CHART

      Tester Connection Condition Specified Condition
      2-3 Seat belt is fastened Below 1 Ω
      2-3 Seat belt is unfastened 10 kΩ or higher
  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH 
    1. Measure the resistance between terminals of the switch when the switch is operated.

      HINT:

      This is the inspection procedure of the inner belt switch for the tension reducer.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION REFERENCE CHART

      Tester Connection Condition Specified Condition
      2-3 Seat belt is fastened Below 1 Ω
      2-3 Seat belt is unfastened 10 kΩ or higher
      Fig 2: Identifying Front Seat Inner Belt Assembly LH Connector Terminals
      G05251971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals