Shift Lever: Inspection
- INSPECT TRANSMISSION CONTROL SWITCH
- Measure the resistance between each terminal of the shift lever assembly when the shift lever is moved to each position.
Standard resistance
RESISTANCE SPECIFICATIONShift Position Tester Connection Specified Condition S, "+" and "-" 3 - 7 Below 1 Ω Except S, "+" and "-" 3 - 7 10 kΩ or higher Press continuously "+" (Upshift) 2 - 5 Below 1 Ω S 2 - 5 10 kΩ or higher Press continuously "-" (Downshift) 1 - 5 Below 1 Ω S 1 - 5 10 kΩ or higher If the resistance value is not as specified, replace the shift lock control ECU.
- Measure the resistance between each terminal of the shift lever assembly when the shift lever is moved to each position.