Shift Lever: Installation

INSTALL SHIFT LEVER ASSEMBLY
1. Install the 4 bolts and shift lever assembly.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  
  Fig 1: Locating Shift Lever Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the shift lock control ECU connector and transmission control switch wire connector.
  
  Fig 2: Identifying Shift Lock Control ECU Connector And Transmission Control Switch Wire Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
1. Install the transmission control cable assembly as shown in the illustration.
  HINT:
  - Install the floor shift cable with the uneven surface facing up.
  - Securely engage the claws of the floor shift cable.
Fig 3: Installing Transmission Control Cable Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 CONSOLE BOX DUCT (See INSTALLATION )
INSTALL NO. 2 CONSOLE BOX DUCT (See INSTALLATION )
INSTALL REAR CONSOLE BOX ASSEMBLY (See INSTALLATION )
INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL CONSOLE BOX CARPET (See INSTALLATION )
INSTALL CONSOLE BOX POCKET (See INSTALLATION )
INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System) (See INSTALLATION )
INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/Seat Heater System) (See INSTALLATION )
INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
INSPECT SHIFT LEVER POSITION (See ADJUSTMENT )
ADJUST SHIFT LEVER POSITION (See ADJUSTMENT )