Transmission Control Cable Assembly: Removal
- REMOVE AIR CONDITIONING UNIT
HINT:
(See REMOVAL )
- REMOVE CENTER AIRBAG SENSOR ASSEMBLY (See REMOVAL )
- REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
- REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
- REMOVE AIR CLEANER INLET ASSEMBLY (See REMOVAL )
- REMOVE AIR CLEANER CAP SUB-ASSEMBLY
- REMOVE AIR CLEANER CASE SUB-ASSEMBLY (See REMOVAL )
- REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
- DISCONNECT NO. 2 SHIFT CABLE GROMMET RETAINER
- Turn back the carpet.
- Remove the 2 bolts and disconnect the No. 2 shift cable grommet retainer.
- Remove the No. 2 shift cable grommet retainer.
- REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
- Disconnect the end of the transmission control cable assembly from the shift lever assembly.
- Disconnect the transmission control cable assembly from the shift lever assembly while pushing the 2 claws of the floor shift cable.
- Remove the nut and transmission control cable from the control shaft lever.
- Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.
- Pull out the transmission control cable assembly from the body.