Data List / Active Test
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in trouble shooting is one way to save time.
- Connect the intelligent tester to the DLC3
- Turn the engine switch on (IG).
- Read the DATA LIST.
Multiplex network master switch assembly:
DIAGNOSIS NOTE CHARTItem Measurement Item/Display (Range) Normal Condition Diagnosis Note P/W AUTO SW Driver side power window auto UP/DOWN switch/
ON or OFFON: Driver side power window auto UP/DOWN switch on master switch operated
OFF: Driver side power window switch on master switch not operated- P/W UP SW Driver side power window manual UP switch/
ON or OFFON: Driver side power window manual UP switch on master switch operated
OFF: Driver side power window switch on master switch not operated- P/W DOWN SW Driver side power window manual DOWN switch/
ON or OFFON: Driver side power window manual DOWN switch on master switch operated
OFF: Driver side power window switch on master switch not operated- P P/W AUTO SW Front passenger side power window remote auto UP/DOWN switch/
ON or OFFON: Front passenger side power window remote auto UP/DOWN switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated- P P/W UP SW Front passenger side power window remote manual UP switch/
ON or OFFON: Front passenger side power window manual UP switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated- P P/W DOWN SW Front passenger side power window remote manual DOWN switch/
ON or OFFON: Front passenger side power window remote manual DOWN switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated- RR P/W AUTO SW Rear power window RH remote auto UP/DOWN switch/
ON or OFFON: Rear power window RH remote auto UP/DOWN switch on master switch operated
OFF: Rear power window RH switch on master switch not operated- RR P/W UP SW Rear power window RH remote manual UP switch/
ON or OFFON: Rear power window RH remote UP switch on master switch operated
OFF: Rear power window RH switch on master switch not operated- RR P/W DOWN SW Rear power window RH remote manual DOWN switch/
ON or OFFON: Rear power window RH manual DOWN switch on master switch operated
OFF: Rear power window RH switch on master switch not operated- RL P/W AUTO SW Rear power window LH remote auto UP/DOWN switch/
ON or OFFON: Rear power window LH auto UP/DOWN switch on master switch operated
OFF: Rear power window LH switch on master switch not operated- RL P/W UP SW Rear power window LH remote manual UP switch/
ON or OFFON: Rear power window LH manual UP switch on master switch operated
OFF: Rear power window LH switch on master switch not operated- RL P/W DOWN SW Rear power window LH remote manual DOWN switch/
ON or OFFON: Rear power window LH manual DOWN switch on master switch operated
OFF: Rear power window LH switch on master switch not operated- P/W LOCK SW Power window LOCK switch
ON or OFFON: Power window LOCK switch pushed in
OFF: Power window lock switch not pushed in- GLASS POS- (1/4) Margin for jam protection triggering force of window glass within range of 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position- GLASS POS-(1/4-2/1) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position
/OK or CAUTIONOK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position- GLASS POS-(1/2-4/3) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position
/OK or CAUTIONOK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position- GLASS POS-(OPEN) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position
/OK or CAUTIONOK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position- Multiplex network body ECU (Cowl side junction block RH)
DIAGNOSIS NOTE CHARTItem Measurement Item/ Display (Range) Normal Condition Diagnostic Note D DOR CTY SW Driver side door courtesy switch/ ON/OFF ON: Driver door is opened
OFF: Driver door is closed- - PERFORM ACTIVE TEST NOTE: Be careful to avoid injuries as this test causes vehicle parts to move.
HINT:
Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester to the DLC3
- Turn the engine switch on (IG).
- Perform the ACTIVE TEST by following the directions on the tester screen.
Multiplex network master switch assembly:
DIAGNOSIS NOTE CHARTItem Tester Details Diagnostic Note P/W UP/DOWN Power Window UP/DOWN -