Fail-Safe Chart

DESCRIPTION

If a hall IC built-in power window regulator motor malfunctions, the applicable power window components enter fail-safe mode. In this mode, power window system operates as follows:

Fig 1: Connecting Cable Of Intelligent Tester (With CAN VIM) To DLC3

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Power Window control system

FAIL-SAFE CHART

Power window function	Power switch status	Power window operation	Jam protection function
Manual UP (switch fully pulled up and held)	Power switch ON (IG)	Operate	Does not operate
Manual DOWN	Power switch ON (IG)	Operate	Does not operate
Key-linked open	-	Does not operate	-
Key-linked close	-	Does not operate	Operates
Wireless transmitter-linked open	-	Does not operate	-
Manual UP (switch fully pulled up and held)	Power switch OFF (key-off function operates)	Does not operate	Operates
Manual DOWN	Power switch OFF (key-off function operates)	Does not operate	-
AUTO UP	Power switch OFF (key-off function operates)	Does not operate	Operates
AUTO DOWN	Power switch OFF (key-off function operates)	Does not operate	-