LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition >> Ignition Coil >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil: Installation

  1. INSTALL IGNITION COIL ASSEMBLY 
    1. Install the 6 ignition coils with the 6 bolts.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    2. Connect the 6 ignition coil connectors.
      Fig 1: Locating Ignition Coils Connector With Bolts
      G05287691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Attach the 3 wire harness clamps and connect the noise filter connector.
      Fig 2: Locating Wire Harness Clamps
      G05303587Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE  (See INSTALLATION )
  3. INSTALL NO. 2 VENTILATION HOSE  (See INSTALLATION )
  4. INSTALL V-BANK COVER  (See INSTALLATION )
  5. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
  6. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
  7. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  8. INSTALL SERVICE PLUG GRIP  (See INSTALLATION )
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  10. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION (2006/02-2006/07) ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals