Front Speed Sensor: Installation

Fig 1: Identifying Front Speed Sensor Bolt

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using a hexagon wrench (5 mm), install the front speed sensor with the bolt to the steering knuckle.

   Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf) 

   NOTE: Make sure the sensor tip is clean.
Fig 2: Identifying Speed Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the speed sensor connector.

Torque: 112 N*m (1,142 kgf*cm, 83 ft.*lbf) 

HINT:

(See TEST MODE PROCEDURE  )