Steering Angle Sensor: Installation

INSTALL STEERING ANGLE SENSOR
1. Install the steering sensor.
  
  Fig 1: Identifying Steering Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the steering sensor connector.
INSTALL TURN SIGNAL SWITCH ASSEMBLY
INSPECT SPIRAL CABLE (See INSPECTION )
PLACE FRONT WHEELS FACING STRAIGHT AHEAD
INSTALL SPIRAL CABLE (See INSTALLATION )
INSTALL STEERING COLUMN COVER (See INSTALLATION )
INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )

Fig 2: Locating Steering Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD (See INSTALLATION )
INSTALL STEERING WHEEL COVER LOWER NO. 2
INSTALL STEERING WHEEL COVER LOWER NO. 3
INSPECT SRS WARNING LIGHT
HINT:

(See DIAGNOSIS SYSTEM )
PERFORM STEERING ANGLE SENSOR ZERO POINT CALIBRATION
HINT:

(See CALIBRATION )
CHECK VSC SENSOR SIGNAL
HINT:

(See TEST MODE PROCEDURE )