Shift Lever Assembly: Disassembly

REMOVE SHIFT POSITION INDICATOR
1. Remove the 4 screws and shift position indicator.
  
  Fig 1: Identifying Shift Position Indicator Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE TRANSMISSION CONTROL SWITCH
1. Remove the transmission control switch connector from the floor shift assembly.
  
  Fig 2: Identifying Transmission Control Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the shift lever support and lock pin from the floor shift assembly.
3. Remove the shift lever guide housing from the floor shift assembly.
  NOTE: First remove the shift lever nut and lock pin, then disengage the 2 claws.
  
  Fig 3: Identifying Shift Lever Guide Housing Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the transmission control switch from the shift lever guide housing.
  
  Fig 4: Identifying Transmission Control Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
1. Remove the shift lever nut, and pull the pin.
2. Remove the shift lever sub-assembly.
  
  Fig 5: Identifying Shift Lever Nut, And Pulling Pin
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 screws and shift lock control ECU sub-assembly.
  
  Fig 6: Identifying Shift Lock Control ECU Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT TRANSMISSION CONTROL SWITCH (See INSPECTION )