DTC Check / Clear
- CHECK DTC
- Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester on.
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DTC INFO /
- Techstream - Select: Body Electrical / (desired system) / Trouble Codes /
- Read the DTCs by following the directions on the tester's screen.
HINT:
Refer to the intelligent tester or Techstream operator's manual for further details.
- CLEAR DTC
- Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester on.
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DTC INFO /
- Techstream - Select: Body Electrical / (desired system) / Trouble Codes /
- Erase the DTCs by following the directions on the tester's screen.
HINT:
Refer to the intelligent tester or Techstream operator's manual for further details.