LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. DATA LIST 

    HINT:

    Using the intelligent tester or Techstream to read the DATA LIST allows values or status of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.

    CAUTION: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
    2. Turn the engine switch on (IG) and turn the tester ON.
    3. Enter the following menus.
      1. Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DATA LIST / ALL /
      2. Techstream - Select: Body Electrical / (desired system) / Data List /
    4. According to the display on tester, read the "DATA LIST" or "Data List".
      1. Intelligent tester

        MASTER SW: 

        INTELLIGENT TESTER MASTER SW

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        P/W AUTO SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON: Driver side power window auto UP/DOWN switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        P P/W AUTO SW Front passenger side power window remote auto UP/DOWN switch signal / ON or OFF ON: Front passenger side power window remote auto UP/DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        RR P/W AUTO SW Rear power window RH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window RH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RL P/W AUTO SW Rear power window LH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window LH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        P P/W UP SW Front passenger side power window remote manual UP switch signal / ON or OFF ON: Front passenger side power window remote manual UP switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        RR P/W UP SW Rear power window RH remote manual UP switch signal / ON or OFF ON: Rear power window RH remote manual UP switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RL P/W UP SW Rear power window LH remote manual UP switch signal / ON or OFF ON: Rear power window LH remote manual UP switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        P P/W DOWN SW Front passenger side power window remote manual DOWN switch signal / ON or OFF ON: Front passenger side power window remote manual DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        RR P/W DOWN SW Rear power window RH remote manual DOWN switch signal / ON or OFF ON: Rear power window RH remote manual DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RL P/W DOWN SW Rear power window LH remote manual DOWN switch signal / ON or OFF ON: Rear power window LH remote manual DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        WINDOW LOCK STS Power window LOCK switch / ON or OFF ON: Power window lock switch LOCK position
        OFF: Power window lock switch UNLOCK position        		 -

        D DOOR MOTOR: 

        INTELLIGENT TESTER D DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        P/W AUTO SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON: Driver side power window auto UP/DOWN switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        D P/W UP SW Driver side power window MANUAL UP switch signal/ON or OFF ON: Driver side power window manual UP switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        D P/W DOWN SW Driver side power window MANUAL DOWN switch signal/ ON or OFF ON: Driver side power window manual DOWN switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        P DOOR MOTOR: 

        INTELLIGENT TESTER P DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        P P/W AUTO SW Front passenger side power window remote auto UP/DOWN switch signal / ON or OFF ON: Front passenger side power window remote auto UP/DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        P P/W UP SW Front passenger side power window remote manual UP switch signal / ON or OFF ON: Front passenger side power window remote manual UP switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        P P/W DOWN SW Front passenger side power window remote manual DOWN switch signal / ON or OFF ON: Front passenger side power window remote manual DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        RL DOOR MOTOR: 

        INTELLIGENT TESTER RL DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        RL P/W AUTO SW Rear power window LH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window LH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        RL P/W UP SW Rear power window LH remote manual UP switch signal / ON or OFF ON: Rear power window LH remote manual UP switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        RL P/W DOWN SW Rear power window LH remote manual DOWN switch signal / ON or OFF ON: Rear power window LH remote manual DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        RR DOOR MOTOR: 

        INTELLIGENT TESTER RR DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        RR P/W AUTO SW Rear power window RH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window RH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RR P/W UP SW Rear power window RH remote manual UP switch signal / ON or OFF ON: Rear power window RH remote manual UP switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RR P/W DOWN SW Rear power window RH remote manual DOWN switch signal / ON or OFF ON: Rear power window RH remote manual DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        MAIN BODY: 

        INTELLIGENT TESTER MAIN BODY

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        COM D-DOOR MTR Connection status between power window regulator motor (for driver side) and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        COM P-DOOR MTR Connection status between power window regulator motor (for front passenger side) and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        COM RL-DOOR MTR Connection status between power window regulator motor (for rear LH) and main body ECU/ OK or STOP OK: Connection
        Stop: No connection        		 -
        COM RR-DOOR MTR Connection status between power window regulator motor (for rear RH) and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        COM MASTER SW Connection status between master switch and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        D DOR CTY SW Driver side door courtesy switch signal/ON or OFF ON: Driver door open
        OFF: Driver door closed        		 -
        P DOR CTY SW Front passenger side door courtesy switch signal/ON or OFF ON: Front passenger door open
        OFF: Front passenger door closed        		 -
        RL DOR CTY SW Rear LH side door courtesy switch signal / ON or OFF ON: Rear LH side door open
        OFF: Rear LH side door closed        		 -
        RR DOR CTY SW Rear RH side door courtesy switch signal / ON or OFF ON: Rear RH side door open
        OFF: Rear RH side door closed        		 -
      2. Techstream

        Master Switch: 

        TECHSTREAM MASTER SWITCH

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        D Door P/W Auto SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON: Driver side power window auto UP/DOWN switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        P Door P/W Auto SW Front passenger side power window remote auto UP/DOWN switch signal / ON or OFF ON: Front passenger side power window remote auto UP/DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        RR Door P/W Auto SW Rear power window RH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window RH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RL Door P/W Auto SW Rear power window LH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window LH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        P Door P/W Up SW Front passenger side power window remote manual UP switch signal / ON or OFF ON: Front passenger side power window remote manual UP switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        RR Door P/W up switch Rear power window RH remote manual UP switch signal / ON or OFF ON: Rear power window RH remote manual UP switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RL Door P/W up switch Rear power window LH remote manual UP switch signal / ON or OFF ON: Rear power window LH remote manual UP switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        P Door P/W Down SW Front passenger side power window remote manual DOWN switch signal / ON or OFF ON: Front passenger side power window remote manual DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        RR Door P/W Down SW Rear power window RH remote manual DOWN switch signal / ON or OFF ON: Rear power window RH remote manual DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RL Door P/W Down SW Rear power window LH remote manual DOWN switch signal / ON or OFF ON: Rear power window LH remote manual DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        Window Lock Switch Status Power window LOCK switch / ON or OFF ON: Power window lock switch LOCK position
        OFF: Power window lock switch UNLOCK position        		 -

        D-Door Motor: 

        TECHSTREAM D-DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        D Door P/W Auto SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON: Driver side power window auto UP/DOWN switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        D Door P/W Up SW Driver side power window MANUAL UP switch signal/ON or OFF ON: Driver side power window manual UP switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        D Door P/W Down SW Driver side power window MANUAL DOWN switch signal/ ON or OFF ON: Driver side power window manual DOWN switch on master switch operated
        OFF: Driver side power window switch on master switch not operated        		 -
        Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        P-Door Motor: 

        TECHSTREAM P-DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        P Door P/W Auto SW Front passenger side power window remote auto UP/DOWN switch signal / ON or OFF ON: Front passenger side power window remote auto UP/DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        P Door P/W Up SW Front passenger side power window remote manual UP switch signal / ON or OFF ON: Front passenger side power window remote manual UP switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        P Door P/W Down SW Front passenger side power window remote manual DOWN switch signal / ON or OFF ON: Front passenger side power window remote manual DOWN switch on master switch operated
        OFF: Front passenger side power window switch on master switch not operated        		 -
        Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        RL-Door Motor: 

        TECHSTREAM RL-DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        RL Door P/W Auto SW Rear power window LH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window LH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        RL Door P/W Up SW Rear power window LH remote manual UP switch signal / ON or OFF ON: Rear power window LH remote manual UP switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        RL Door P/W Down SW Rear power window LH remote manual DOWN switch signal / ON or OFF ON: Rear power window LH remote manual DOWN switch on master switch operated
        OFF: Rear power window LH switch on master switch not operated        		 -
        Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        RR-Door Motor: 

        TECHSTREAM RR-DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        RR Door P/W Auto SW Rear power window RH remote auto UP/DOWN switch signal / ON or OFF ON: Rear power window RH remote auto UP/DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RR Door P/W Up SW Rear power window RH remote manual UP switch signal / ON or OFF ON: Rear power window RH remote manual UP switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        RR Door P/W Down SW Rear power window RH remote manual DOWN switch signal / ON or OFF ON: Rear power window RH remote manual DOWN switch on master switch operated
        OFF: Rear power window RH switch on master switch not operated        		 -
        Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position/OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -

        Main Body: 

        TECHSTREAM MAIN BODY

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        Communication D-Door Motor Connection status between power window regulator motor (for driver side) and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        Communication P-Door Motor Connection status between power window regulator motor (for front passenger side) and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        Communication RR-Door Motor Connection status between power window regulator motor (for rear LH) and main body ECU/ OK or STOP OK: Connection
        Stop: No connection        		 -
        Communication RL-Door Motor Connection status between power window regulator motor (for rear RH) and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        Communication Master SW Connection status between master switch and main body ECU/OK or STOP OK: Connection
        Stop: No connection        		 -
        D Door Courtesy SW Driver side door courtesy switch signal/ON or OFF ON: Driver door open
        OFF: Driver door closed        		 -
        P Door Courtesy SW Front passenger side door courtesy switch signal/ON or OFF ON: Front passenger door open
        OFF: Front passenger door closed        		 -
        RL Door Courtesy SW Rear LH side door courtesy switch signal / ON or OFF ON: Rear LH side door open
        OFF: Rear LH side door closed        		 -
        RR Door Courtesy SW Rear RH side door courtesy switch signal / ON or OFF ON: Rear RH side door open
        OFF: Rear RH side door closed        		 -
  2. ACTIVE TEST 

    HINT:

    Using the intelligent tester or Techstream to perform ACTIVE TESTs allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing ACTIVE TESTs early in troubleshooting is one way to save diagnostic time. DATA LIST information can be displayed while performing ACTIVE TESTs.

    1. Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
    2. Turn the engine switch on (IG) and turn the tester ON.
    3. Enter the following menus.
      1. Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / ACTIVE TEST /
      2. Techstream - Select: Body Electrical / (desired system) / Active Test /
    4. According to the display on tester, perform the "ACTIVE TEST" or "Active Test".
      CAUTION: Be careful to avoid injuries as this test causes vehicle parts to move. During the ACTIVE TEST, the jam protection function does not operate.
    5. Intelligent tester

      D DOOR MOTOR: 

      INTELLIGENT TESTER D DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      P/W UP/DOWN Driver side power window UP/OFF (OFF)
      P/W UP/DOWN Driver side power window DOWN/OFF (OFF)

      P DOOR MOTOR: 

      INTELLIGENT TESTER P DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      P/W UP/DOWN Front passenger side power window UP/OFF (OFF)
      P/W UP/DOWN Front passenger side power window DOWN/OFF (OFF)

      RL DOOR MOTOR: 

      INTELLIGENT TESTER RL DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      P/W UP/DOWN Rear LH side power window UP/OFF (OFF)
      P/W UP/DOWN Rear LH side power window DOWN/OFF (OFF)

      RR DOOR MOTOR: 

      INTELLIGENT TESTER RR DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      P/W UP/DOWN Rear RH side power window UP/OFF (OFF)
      P/W UP/DOWN Rear RH side power window DOWN/OFF (OFF)
    6. Techstream

      D-Door Motor: 

      TECHSTREAM D-DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      Power Window Driver side power window UP/OFF (OFF)
      Power Window Driver side power window DOWN/OFF (OFF)

      P-Door Motor: 

      TECHSTREAM P-DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      Power Window Front passenger side power window UP/OFF (OFF)
      Power Window Front passenger side power window DOWN/OFF (OFF)

      RL-Door Motor: 

      TECHSTREAM RL-DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      Power Window Rear LH side power window UP/OFF (OFF)
      Power Window Rear LH side power window DOWN/OFF (OFF)

      RR-Door Motor: 

      TECHSTREAM RR-DOOR MOTOR SPECIFICATION

      Tester Display Test Part Control Range
      Power Window Rear RH side power window UP/OFF (OFF)
      Power Window Rear RH side power window DOWN/OFF (OFF)
scientia non olet · About LEMON Manuals