April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Power Window Switch: Installation

HINT:

Use the same procedures for the LH side and RH side.
The procedures listed below are for the RH side.

INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
1. Install the power window regulator switch assembly with the 2 claws.
  
  Fig 1: Identifying Power Window Regulator Switch Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
  
  Fig 2: Locating Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the armrest base panel assembly with the 2 clamps.
  
  Fig 3: Identifying Clamps Location
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002