Window Defogger Wire: Repair

REPAIR DEFOGGER WIRE
1. Clean the broken wire tips with grease, wax and silicone remover.
2. Place masking tape along both sides of the wire.
  
  Fig 1: Placing Masking Tape Along Both Sides Of Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Thoroughly mix the repair agent.
  DuPont paste:
  
  No. 4817 or equivalent
4. Using a fine tip brush, apply a small amount of the agent to the wire.
  
  Fig 2: Applying Small Amount Of Agent To Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. After a few minutes, remove the masking tape.
  NOTE: Do not repair the defogger wire again for at least 24 hours.