LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Electrical >> Starter >> Starting >> Smart Access System With Push-Button Start >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester or Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    NOTE: In the table below, the values listed under "Normal Condition" are for reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect the intelligent tester or Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / (desired system) / DATA LIST /
      2. Techstream - Select: Body Electrical / (desired system) / Data List /
    5. According to the display on tester, read the "Data List".
      1. Intelligent tester

        MAIN BODY 

        INTELLIGENT TESTER MAIN BODY

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        IG SW Engine switch on (IG)/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        ACC SW Engine switch on (ACC)/ON or OFF ON: Engine switch is on (ACC)
        OFF: Engine switch is off        		 -
        STS W1 Start switch 1/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        STS W2 Start switch 2/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        STR UNLOCK SW Steering lock condition/ON or OFF ON: Steering is unlocked
        OFF: Steering is locked        		 -
        N SW / C SW Park / neutral position switch/ON or OFF ON: Shift lever in P or N
        OFF: Shift lever in R or D        		 -
        VEHICLE SPD SIG Vehicle speed signal/STOP or RUN STOP: Vehicle is stopped
        RUN: Vehicle is running        		 -
        E/G COND Engine condition/STOP or RUN STOP: Engine is stopped
        RUN: Engine is running        		 -
        IG1 RELAY MON1 D-IG1 relay outer relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        IG2 RELAY MON1 IG2 outer relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        IG1 RELAY MON2 D-IG1 relay inner relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        IG2 RELAY MON2 IG2 inner relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        ACC RELAY MON D-ACC relay monitor/ON or OFF ON: Engine switch is on (ACC)
        OFF: Engine switch is off        		 -
        LATCH CIRCUIT Latch circuit/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off, on (ACC) or engine is running        		 -
        ST REQUEST SIG Starter request signal/ON or OFF ON: ST relay is ON
        OFF: ST relay is OFF        		 -
        PWR COND Power supply condition/ALL, ACC ON, IG1 IG2, ST ON ALL: All relays are ON
        ACC ON: D-ACC relay is ON
        IG1:D-IG1 relay is ON
        IG2: IG2 relay is ON
        ST ON: ST relay is ON        		 -
        ST RELAY MON Starter relay monitor/ON or OFF ON: Starter relay is ON
        OFF: Starter relay is OFF        		 -
        #CODES Number of diagnosis codes/Min: 0, Max: 255 - -
        STOP LIGHT SW Stop light switch/ON or OFF ON: Brake pedal is depressed
        OFF: Brake pedal is released        		 -

        SMART ACCESS 

        INTELLIGENT TESTER SMART ACCESS REFERENCE

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        IG SW Engine switch/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        LOW BATTERY Key battery conditions/ON or OFF ON: Battery is depleted
        OFF: Battery is not depleted        		 -
        UNMATCH FORMAT Code format/YES or NO YES: Code format matches
        NO: Code format differs        		 -
        NO RESPONSE Response/YES or NO YES: Response
        NO: No response        		 -
        WRONG CODE ID code/YES or NO YES: ID code matches
        NO: ID code differs        		 -
        WRONG C CODE Challenge code/YES or NO YES: Challenge code matches
        NO: Challenge code differs        		 -
        UNMATCH V-ID Key number/YES or NO YES: Key number matches
        NO: Key number differs        		 -
        S CODE CHK S code certification result/NG or OK NG: S code certification result is abnormal
        OK: S code certification result is normal        		 -
        L CODE CHK L code certification result/NG or OK NG: L code certification result is abnormal
        OK: L code certification result is normal        		 -
        IGNITION AREA Key area where engine start is possible/ ALL or FRONT ALL: All areas
        FRONT: Front only        		 -

        BODY NO.4 

        INTELLIGENT TESTER BODY NO.4 REFERENCE

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        STOP LGT Tr. Stop light switch/ON or OFF ON: Brake pedal depressed
        OFF: Brake pedal released        		 -
      2. Techstream

        Main Body 

        TECHSTREAM MAIN BODY REFERENCE

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        IG SW Engine switch on (IG)/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        ACC SW Engine switch on (ACC)/ON or OFF ON: Engine switch is on (ACC)
        OFF: Engine switch is off        		 -
        Start Switch 1 Start switch 1/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        Start Switch 2 Start switch 2/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        Steering Unlock Switch Steering lock condition/ON or OFF ON: Steering is unlocked
        OFF: Steering is locked        		 -
        Neutral SW/ Clutch SW Park / neutral position switch/ON or OFF ON: Shift lever in P or N
        OFF: Shift lever in R or D        		 -
        Vehicle Speed Signal Vehicle speed signal/STOP or RUN STOP: Vehicle is stopped
        RUN: Vehicle is running        		 -
        Engine Condition Engine condition/STOP or RUN STOP: Engine is stopped
        RUN: Engine is running        		 -
        IG1 Relay Monitor(Outside) D-IG1 relay outer relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        IG2 Relay Monitor(Outside) IG2 outer relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        IG1 Relay Monitor(Inside) D-IG1 relay inner relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        IG2 Relay Monitor(Inside) IG2 inner relay monitor/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        ACC Relay Monitor D-ACC relay monitor/ON or OFF ON: Engine switch is on (ACC)
        OFF: Engine switch is off        		 -
        Latch Circuit Ratch circuit/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off, on (ACC) or engine is running        		 -
        Starter Request Signal Starter request signal/ON or OFF ON: ST relay is ON
        OFF: ST relay is OFF        		 -
        Power Supply Condition Power supply condition/ALL, ACC ON, IG1 IG2, ST ON ALL: All relays are ON
        ACC ON: D-ACC relay is ON
        IG1:D-IG1 relay is ON
        IG2: IG2 relay is ON
        ST ON: ST relay is ON        		 -
        #Codes Number of diagnosis codes/Min: 0, Max: 255 - -
        Stop Light SW Stop light switch/ON or OFF ON: Brake pedal is depressed
        OFF: Brake pedal is released        		 -

        Smart Access 

        TECHSTREAM SMART ACCESS REFERENCE

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        Ignition Switch Engine switch/ON or OFF ON: Engine switch is on (IG)
        OFF: Engine switch is off        		 -
        Key Low Battery Key battery conditions/ON or OFF ON: Battery is depleted
        OFF: Battery is not depleted        		 -
        Unmatch Code or Form Code format/YES or NO YES: Code format matches
        NO: Code format differs        		 -
        No Response Response/YES or NO YES: Response
        NO: No response        		 -
        ID Code Difference(Resp) ID code/YES or NO YES: ID code matches
        NO: ID code differs        		 -
        C Code Difference Challenge code/YES or NO YES: Challenge code matches
        NO: Challenge code differs        		 -
        Unmatched Vehicle-ID Key number/YES or NO YES: Key number matches
        NO: Key number differs        		 -
        S Code Check S code certification result/NG or OK NG: S code certification result is abnormal
        OK: S code certification result is normal        		 -
        L Code Check L code certification result/NG or OK NG: L code certification result is abnormal
        OK: L code certification result is normal        		 -
        Ignition Available Area Key area where engine start is possible/All or Front All: All areas
        Front: Front only        		 -

        Body No.4 

        TECHSTREAM BODY NO.4 REFERENCE

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        Stop Light Tr. Stop light switch/ON or OFF ON: Brake pedal depressed
        OFF: Brake pedal released        		 -
  2. PERFORM ACTIVE TEST 

    HINT:

    Using the intelligent tester or Techstream to perform the Active Test allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Turn the engine switch off.
    2. Connect the intelligent tester or Techstream to the DLC3.
    3. Turn the engine switch on (IG).
    4. Turn the tester on.
    5. Enter the following menus:
      1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / (desired system) / ACTIVE TEST /
      2. Techstream - Select: Body Electrical / (desired system) / Active Test /
    6. According to the display on tester, perform the "Active Test".
      1. Intelligent tester

        MAIN BODY 

        INTELLIGENT TESTER MAIN BODY REFERENCE

        Tester Display Test Part Control Range Diagnostic Note
        LIGHTING IND Indicator illumination ON/OFF -
        IND CONDITION Indicator light illumination pattern Green/Amber/No Sig -
        STR LOCK PWR Steering lock ECU power supply ON/OFF -

        SMART ACCESS 

        INTELLIGENT TESTER SMART ACCESS REFERENCE

        Tester Display Test Part Control Range Diagnostic Note
        FR TRANSMITTER Indoor key antenna (for front) ON / OFF -
        RR TRANSMITTER Indoor key antenna (for rear1) ON / OFF -
        IN_BDR TRNSMTTR Indoor key antenna (for rear2) ON / OFF -
      2. Techstream

        Main Body 

        TECHSTREAM MAIN BODY REFERENCE

        Tester Display Test Part Control Range Diagnostic Note
        Indicator for Lighting Indicator illumination ON/OFF -
        Indicator Condition Indicator light illumination pattern Green/Amber/No Sig -
        P Supply for Steering Lock Steering lock ECU power supply ON/OFF -

        Smart Access 

        TECHSTREAM SMART ACCESS REFERENCE

        Tester Display Test Part Control Range Diagnostic Note
        Fr-Seat Inside Transmitter Indoor key antenna (for front) ON / OFF -
        Rr-Seat Inside Transmitter Indoor key antenna (for rear1) ON / OFF -
        Inside Trunk/Backdoor Transmitter Indoor key antenna (for rear2) ON / OFF -
scientia non olet · About LEMON Manuals