LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Service Information & Circuit Tests >> Engine Coolant Temperature Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Installation

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 
    1. Install a new gasket to the engine coolant temperature sensor.
    2. Install the engine coolant temperature sensor.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    3. Connect the engine coolant temperature sensor connector.
      Fig 1: Locating Engine Coolant Temperature Sensor Connector
      G04943082Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. ADD ENGINE COOLANT  (See REPLACEMENT )
  3. INSPECT FOR COOLANT LEAK  (See ON-VEHICLE INSPECTION )
  4. INSTALL NO. 1 AIR CLEANER INLET (See  INSTALLATION   ) 
  5. INSTALL AIR CLEANER INLET COVER (See  INSTALLATION   ) 
  6. INSTALL V-BANK COVER SUB-ASSEMBLY (See  INSTALLATION   ) 
  7. INSTALL NO. 1 ENGINE UNDER COVER  (See REPLACEMENT )
scientia non olet · About LEMON Manuals